How To Remove A Stripped Mower Blade Bolt

Hold the bolt in place with the help of a pair of pliers and use the hacksaw to cut a little bit off the top. Put a wrench socket of the correct size on the head of the bolt securing the blade to the blade holder and apply force to the wrench handle in the counterclockwise direction to loosen the blade bolt.

Super Heavy Duty Nuts Splitter Tools Video Cool Tools Homemade Tools Garage Tools

The bolt may have a 12-inch 58-inch or 34-inch head depending on mower model.

How to remove a stripped mower blade bolt. Kroil is the best out there. This will hopefully help it come loose and allow you to pull it out. The heat on the spindle causes the metal to expand and the.

Crack the Bad Nut. Someone in the past had used the wrong wrench on this 916 inch head blade bolt rounding off the corners that no wrench could remove it. Heat is a good idea too.

Once youve drilled the hole the bolt will no longer have a place to stay in and you can use a pair of pliers or a wrench to pull it out. This video shows you. An Impact gun hammers the bolt as well as twisting it this loosens the corrosion between the threads.

By far the preferred way to remove a bolt. Place a block of wood between the blade and the Craftsman riding lawn mowers deck. Doing so gives you more leverage and prevents the blade from moving as you try to remove the stuck bolt.

Tap it around the dia and when the session is done replace the little pool of liquid wrench. But if the bolt head is rounded the impact tool is no use. Stripped Bolt Head Originally Posted by adjusterr Warm the bolt head with a small torch dont overheat just good and warm spray liberally with Kroil or PB Blaster or other penetrating oilallow a few minutes for the oil to work smack top of bolt with hammer remove.

The next best method would be to use a socket especially designed for rounded bolt heads. You want to apply cold to the bolt and heat to the part the bolt screws in to likely the spindle. While you are waiting in this manner strike the bolt nubbin lightly with a soft hammer copper or lead or lightly with a steel one every couple hours.

If you cant get it to turn you can cut it off with an angle grinder and a slicer blade and once the tension is gone hopefully it will turn easily enough to remove with vice grips. The easiest method would be to bring the mower to a welding shop and ask them to weld a nut onto the head of the bolt. Then use the hammerchisel in counterclockwise blows on the outside circumference of the bolt stub.

A n impact tool will remove the bolt in seconds and you wont need to lock the blade.

How To Remove A Stripped Bolt 10 Simple Methods Sensible Digs