How To Remove The Top Of A Stylus Toilet

Then press down on the screw. To get rid of stains using baking soda and vinegar follow the following steps.

How To Open A Dual Flush Toilet Cistern Youtube

Use a screwdriver that has a wide flat blade to remove the screw and allow for removal of the chrome plate surrounding the flush button.

How to remove the top of a stylus toilet. Both buttons have a finger nail notch on the side. Add approximately one cup of. I took the lid off the toilet and can find nothing wrong but what I think is.

Turn your finger so that your fingernail engages with the side of the other button. This releases the button clips and the buttons can be just pulled out. Got a Caroma Stylus.

Httpbitlybathroomwares Click here to find more products http. Push one button down all the way and keep it down the toilet will flush. Now that youve got the lid off take the opportunity to give the top of the bowl a good clean with disinfectant.

Once again you should set the lid gently on a towel and avoid dropping it or placing it with force on any delicate bathroom surfaces. Washer is mounted on the bottom of the mechanism - remove by stretching over the flanged retaining lug. Alan from Salter Point WA.

Watch this video to learn how to fix a leak yourself and save money. Lift tube straight up. If I turn OFF the inlet value at the wall and leave it for half an hour.

If all else fails remove screw cut the top of the bung flush to the ceramic and push down. The cap can be quite tight so hold the lower part of the inlet valve while you unscrew anti-clockwise the capLook carefully at the next piece maybe mark it with a pen on one side so that it gets refitted the same way it comes out You will see the washers that need replacing. Both flush buttons have.

Clean the flange and horn with a stiff wire brush. 2 Remove the old toilet seat. Undo the nuts and lift the whole toilet seat assembly off the bowl.

The tank would become empty. Unscrew the Inlet valve cap after removing the metal pin using pliers. I have stylus and it seems the toilet is leaking to the bowl with a really slight leak.

Then pull the whole thing upward with a wiggle and out. Grasp the tube near the top with two hands and firmly twist ANTI CLOCKWISE about 110 th of a turn. Dig your nail into the notch and pull out the button.

There are two wing nuts holding the old seat on to the toilet bowl. Scrape away the old wax from the toilet flange and the bottom of the toilet with a paint scraper. This is a good time to inspect the toilet flange to see if it also needs to be removed and replaced.

This pushes the coned nut down and releases the expansion pressure. A better idea is to cut a 10cm x 4cm piece of clear flexible plastic like from a shirt box make a cylidrical shape and slide it down around the 2 buttons - push one down first. To remove the lid of Armitage Shanks dual flush toilet cistern first two buttons have to be removed by pulling them out from their socket.

Swish the solution around using a toilet brush and leave it to sit for about a minute. Once you can access the top of the bolts use your screwdriver to remove them. Gently twist and pull it out.

From there you should be able to remove the toilet tanks lid. You may need to reach underneath the toilet to untwist the nuts holding them in place. Pour one cup of vinegar about 240ml into your toilet bowl.

Throw away the old wax into a bucket lined with a plastic bag.

How To Remove The Lid Fix A Leaking Caroma Stylus Toilet Youtube