How To Remove Old Toilet Tank Lever

Locate the chain attached to the rod. Using a pair of adjustable pliers loosen the.

How To Replace A Toilet Tank Lever Mother Daughter Projects

Unhook the toilet chain from the arm noting which hole the clasp is fastened into.

How to remove old toilet tank lever. Unscrew to the end and remove it. Tighten locknut hand tight in a counter-clockwise direction. This should fit onto the top of the tank but it will not usually be attached.

Simple once you see how its do. To remove the existing toilet flush lever you will need to be able to access the toilet tank. In this How To Fix a Toilet video Bob shows you his method of cutting off the fused lock nut from a toilet tank handlelever.

So enter the reverse thread in which you would tighten to the left and loosen or remove to the right thus keeping the tank lever from eventually flopping around. A nut holds the toilet handle in place. As you remove the handle you may feel some resistance.

Pull lever mount off shaft as shown above. To do this lift off the top cover of the toilet tank. There is usually just one nut that holds it in place.

Pliers may be needed Slide nut off lever arm. Sometimes the bolts are corroded and will not just come off. Removing the Old Lever.

How to Remove Toilet Tank Bolts Now use your wrench to loosen the tank bolt nuts from underneath the toilet bowl. Unclip the chain so the rod is free. Throw the old handle away once you take it out from the tank.

Remove the lid from the toilet tank and set it aside. Remove lever arm from package. Once the handle is completely detached from the chain pull the handle straight out from the toilet.

Shut the water supply off and drain down the tank by flushing it if you do not want to work in the cold water. A step-by-step easy to follow tutorial video showing you EXACTLY HOW to remove and replace a broken Toilet Handle or Lever. Remove Old Fill Valve The valve nut locks the toilet valve body into the toilet tank.

Remove locknut by turning it clockwise. Unscrew the nut until where you can continue by hand. Unhook flapper chain from tank lever.

Pull lever through tank hole. Loosen locknut by turning counter-clockwise. This makes it easier to remove to do maintenance and repairs.

Pull the old handle out from the toilet. If you find that the bolts are swiveling use the wrench to back the nut off while you unscrew the bolt with a long screwdriver from inside the tank. Many older vintage toilet tank levers were made of a cheap white metal composite which would eventually fuse to the threads of the handle making it impossible to remove.

A chain connects that arm to the flush valve or toilet flapper. Using adjustable pliers or adjustable wrench remove the valve nut. Removing a toilet tank lever is not too hard.

Remove and lift the fill valve from the tank. Maneuver the handle so the long lever attached to it slides through the hole where the handle used to be. Now pull out the old handle gently as you move sideways to allow the lever to pass through as well.

Older style handles were made. Loosen the nut from inside of the tank.

How To Fix Your Toilet Handle Homeserve