How To Remove Links From A Stauer Watch Band

Link Removal Kits - httpsamznto2ZSj8DiHow to remove a watch band link using a Thumb Tack or Push Pin to Resize the watch repair. Particular links on your watch will have arrows indicating that they can be removed.

Stauer Flyboy 1916 Midnight Men S Watch

If the links are solid on one side with a hole on the other side with a screw head facing.

How to remove links from a stauer watch band. The correct way to remove a link for a ceramic band. Insert it into the recessed side of the link. Out of the link.

Thanks for the link I tried and tried but couldnt get any links out. Once the required amount of links are removed join the remaining links together using the removed pins. Measure the space between the lugs on the watch.

Insert the spring bars from the old band into the ends of the new band. Using these measurements purchase a new band. Continue doing so until you have removed all of the links that are making the watch too big for your wrist.

Carefully sliding out the pins in each link. You insert a Sharp toolon the side with the arrow and push. Watch Band Link Remover This small plastic device is something every jeweler has.

The best way to identify a band with screw links is to look at the side of the band. Tools usedPlastic Tipped Hammer. Buy Watch Tool HereUS.

Step 2 Place the watch underside facing up on a lint-free cloth. Small removable pins hold each of these links in place. Alternatively measure the width of the old band.

Locate the Link Pins To remove a link in your watch band you must first locate where to remove the link and how many links you want to remove. With a solid tap push the pin out until it is easy to pull the pin using nee-dle nose pliers. The link you choose to remove will be attached to another link on each side by a thin metal pin or in some cases a screw.

Click here to learn How to Remove T-Bar Style Band Links. Using a cloth makes it easier to collect the small links and pins you remove and prevents the pins from rolling away. If the links have oval shaped cutouts in the back with arrows pointing toward them your watch most likely has t-bar pins holding it together.

If you have short fingernails try using tweezers or anything with a sharp edge that can easily unfasten a link. To do this you will need to use a sharp pointed tool. Then with needle nose pliers pull on the pin.

Watch Band Screw Links. Flick the tip of your fingernail inside the clasp to open the extra links. Use a spring bar tool to remove the spring bar from one side of the watch.

Its easy to use painless and takes just a couple of seconds to line up the link and push the pin through by screwing the pin pusher through the device. Step 3 Locate the pin head on the side of the link. The correct way to remove a link for a ceramic band.

Stauer Titan Instruction Manual Pdf Download Manualslib